Fastcap 2P-10-MED-2OZ MEDIUM ADHESIVE - 2 OZ

SKU
FSC-2P-10-MED-2OZ
$6.95
Just apply the adhesive, then spray the activator and stick it together for a strong, permanent bond. 2P-10 can be used on many materials as long as they are clean and the surface is well prepared. The surface should be clean, with no oil. If the surface is slightly etched, the glue will bite more effectively. While it should not be used in lieu of a weld (on metal), 2P-10 is very effective for tacking, to hold a piece in place for welding.
Fastcap 2P-10-MED-2OZ MEDIUM ADHESIVE - 2 OZ is available to buy in increments of 1
Free ShippingNo
Features
  • Which Viscosity Should I Use?
  • Thin - designed for wicking into hairline cracks
  • Medium - designed for wicking into 1/8 inch cracks
  • Thick - excellent gap filling capacity, great for binding joints, ideal for filling holes
  • Jel™ - excellent for filling large gaps, great for trim carpentry, will not run
  • Rubber-Toughened Thick - provides elasticity to joints and is 10% stronger than standard 2P-10 Thick
  • Rubber-Toughened Jel™- provides elasticity to joints and is 10% stronger than standard 2P-10 Jel™
  • BrandFastCap Tools
    Ship InUsually Ships in 24 to 72 Hours
    Enable DropshipNo
    Your Rating
    You May Also Like