Amana Tool LB14108 Carbide Tipped Non-Melt Plastic 14 Inch D x 108T M-TCG, -2 Deg, 1 Inch Bore, Circular Saw Blade

When cutting acrylics and plastics, "chip-welding" ニ_ニ_ニ_ a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2ニ_ negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

Excellent for Cutting

• Plastics
• Acrylonitrile Butadiene Styrene (ABS)
• Acetal
• Acrylic
• Acrylic Sheets
• Alupanelニ_
• Copolymer
• Coroplastニ_*
• Correx Boards
  
• Corrugated Polypropolyene
• Delrin
• Ethylene-Vinyl Acetate
• Foam Board
• Gatorfoamニ_**
• High Density Polyethylene (HDPE)
• High Impact Polystyrene (HIPS)
• High Pressure Laminates (HPL)
• Low Density Polyethylene (LDPE)
• Luciteニ_
• Mechanical/Engineered Plastics

• Nitrile Rubber
• Nylon
• Perspexニ_ Cast Acrylic Sheet
• Plastic Laminate Flooring
• Plexiglasニ_
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate (Lexanニ_ニ_)
• Polyethylene (PE)
• Polyethylene Terephthalate (PET)
• Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
• Polypropylene (PP)
• Solid Surface
• Styrene-Acrylonitrile
• Styrene-Butadiene Rubber (SBR)
• Styrene-Isoprene-Styrene (SIS)
• Teflonニ_
• Thermoplastic Polyolefin (TPO)
• Trespaニ_ Meteonニ_***
• Ultra High Molecular Weight Polyethylene (UHMWPE)
• Wood

: