Amana Tool DT12841-30 Carbide Tipped Ditec Solid Surface 12 Inch D x 84T S-TCG, 0 Deg, 30MM Bore, Circular Saw Blade

These blades are designed for cutting plastic laminate, Plexiglasニ_, and solid surface materials such as Dupont Corianニ_, Wilsonartニ_, Gibraltarニ_ and Fountainheadニ_. The DITEC carbide tips are ground in a triple chip geometry unique to this blade, and leave a swirl-free cut in solid surface materials.

The thick, stable plate reduces vibration that degrades the cut and shortens tool life. The blade is suitable for a variety of saw configurations. Its 0ニ_ hook angle virtually eliminates self-feeding when used with a radial arm saw.

ニ_ニ__ Exclusive DITECニ_ニ_ Carbide Tips

ニ_ニ__ Higher Reliability & Lower Maintenance

ニ_ニ__ Low Noise Level

ニ_ニ__ Laser Cut Saw Bodies

ニ_ニ__ Excellent Cutting Quality

Instructions for grinding:

• For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.
• Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade.
• Since the carbide in the DITECニ_ニ_ is harder than other carbides, it is critical that you protect them from ニ_ニ_ニ_thermal shockニ_棟 if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITECニ_ニ_ carbide.