Amana Tool DT120T24 Carbide Tipped Ditec 2000 Adjustable Type Scoring 120mm D x 24T ATB, 8 Deg, 20mm Bore, Scoring Set

Used on panel saws with separate scoring units for chip-free cuts on both sides of the material. With conical type scoring blades, the kerf width changes with depth of penetration. Used in combination with our industrial saw blades '7' series only (#714721, etc.). Also used in combination with the DITECニ_ニ_ series panel saw main blades. Kerf range should match the main blade.

ニ_ニ__ Exclusive DITECニ_ニ_ Carbide Tips

ニ_ニ__ Higher Reliability & Lower Maintenance

ニ_ニ__ Low Noise Level

ニ_ニ__ Laser Cut Saw Bodies

ニ_ニ__ Excellent Cutting Quality

Instructions for grinding:

• For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.
• Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade.
• Since the carbide in the DITECニ_ニ_ is harder than other carbides, it is critical that you protect them from ニ_ニ_ニ_thermal shockニ_棟 if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITECニ_ニ_ carbide.