Amana Tool DT120T14-20 Carbide Tipped Ditec 2000 Adjustable Type Scoring 120MM D x 12 x 2T x ATB, 20MM Bore, Scoring Set

Used on panel saws or sliding table saws with separate scoring units for chip-free cuts on both sides of the material. Adjustable scoring sets consist of two 12-tooth saw blades with shims to adjust the kerf width (2.8mm to 3.6mm). Used in combination with our industrial saw blades with standard kerf (example #612721, #DT12721, etc.).

ニ_ニ__ Exclusive DITECニ_ニ_ Carbide Tips

ニ_ニ__ Higher Reliability & Lower Maintenance

ニ_ニ__ Low Noise Level

ニ_ニ__ Laser Cut Saw Bodies

ニ_ニ__ Excellent Cutting Quality

Instructions for grinding:

• For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.
• Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade.
• Since the carbide in the DITECニ_ニ_ is harder than other carbides, it is critical that you protect them from ニ_ニ_ニ_thermal shockニ_棟 if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITECニ_ニ_ carbide.