Amana Tool Free Shipping

Amana Tool 55431 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 D x 11/16 CH x 1/2 Inch SHK Router Bit Set

SKU
AMA-55431
$176.36
2 PC OGEE STILE/RAIL 3/4 MAT.

Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications. These sets are offered in two configurations, one for working material up to 1" thick, the other for material between 5/8" and 7/8" in thickness. The same three profiles are available in either configuration.

3/4" Material
Bits in this set have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary ニ_ニ_ニ_ using the provided shims ニ_ニ_ニ_ after the cutters have been resharpened. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Free ShippingYes
Features3/4" Material
Bits in this set have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary – using the provided shims – after the cutters have been resharpened. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.
Tech Specs
Diameter (D) 1-5/8
Radius (R) 1/4
Cutting Height (B) 11/16
B1 1/4
Shank (d) 1/2
Overall Length (L) 3-1/8
Type Ogee
Replacement Bearing 47708
Material size 3/4
Flutes 2
C 3/8


2 Piece Stile and Rail Sets - OGEE - with Ball Bearing Guide for 3/4" Material
2-Wing
BrandAmana Tools
Ship InCurrently Unavailable
Enable DropshipNo
Your Rating
You May Also Like