Amana Tool 55380 Carbide Tipped Classical Reversible Stile and Rail Assembly 1-5/8 D x 11/16 CH x 1/2 Inch SHK Router Bit

Cut both the stiles and rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. The assembly order for each setup is shown in the drawing. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material.

Free Shipping	Yes
Features	Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit features Use one tool for both cuts by reversing the assembly. Includes shims that give perfect alignment before and after sharpening. For best results, the rail cut should be done on a router table. With complete instructions. Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material. Tongue & Groove can be used on 1/2" through 3/4" material.
Tech Specs	Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit specifications: Manufacturer: Amana Tools Model No.: 55380 Category: Amana Stile & Rail Bits D - Cutting Diameter:1-5/8" Pattern Type:Classical A' Reveal:3/8" Tool No.:55380 B1 - Cutting Length:11/16" B2 - Cutting Length:7/8" d - Shank Diameter:1/2" L - Overall Length:3" Shipping Weight: 0.50 lbs. UPC: 738685953808
In The Box	Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit includes: Individual components: 55382:Classical profile cutter 55354:1/4" groove cutter 47708:Ball bearing 47612:1/2" shank arbor with nut 55356:.05mm shims (3 required) 55357:.10mm shims (3 required) 55402:1.0mm washers (2 required)
Brand	Amana Tools
Ship In	Usually Ships in 24 to 72 Hours
Special Banner
Enable Dropship	No

Amana Tool 55380 Carbide Tipped Classical Reversible Stile and Rail Assembly 1-5/8 D x 11/16 CH x 1/2 Inch SHK Router Bit

Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit features

Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit specifications:

Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit includes:

Amana Tool 55431 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 D x 11/16 CH x 1/2 Inch SHK Router Bit Set

Amana 47202 Laminate Trim Router Bit

Amana Tool 45660 T-Slot Square Edge 1-1/8 Dia x 13/16 Cut Height x 1/2 Inch Shank Router Bit

Amana Tool 46227-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/8 Dia x 1/2 CH x 1/8 SHK 2 Inch Long Down-Cut Router Bit

Amana Tool 55380 Carbide Tipped Classical Reversible Stile and Rail Assembly 1-5/8 D x 11/16 CH x 1/2 Inch SHK Router Bit

Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit features

Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit specifications:

Amana Tool 55380 3" x 1-5/8" Classical Reversible Stile & Rail Bit includes:

Amana Tool 55431 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 D x 11/16 CH x 1/2 Inch SHK Router Bit Set

Amana 47202 Laminate Trim Router Bit

Amana Tool 45660 T-Slot Square Edge 1-1/8 Dia x 13/16 Cut Height x 1/2 Inch Shank Router Bit

Amana Tool 46227-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/8 Dia x 1/2 CH x 1/8 SHK 2 Inch Long Down-Cut Router Bit

Real email address is required to social networks

Log In