BBB Rating A+ Click for Profile  
Track Order
Contact Us
  1-800-640-8665
Search
Amana Tool Free Shipping

Amana Tool 55370 Carbide Tipped Traditional Reversible Stile and Rail Assembly 1-5/8 D x 11/16 CH x 1/2 Inch SHK Router Bit

SKU
AMA-55370
main product photo
$102.53
TRADITIONAL STILE AND RAIL ASS
Categories: Door Making Bits, Amana Tool

Cut both the stiles and rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. The assembly order for each setup is shown in the drawing. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material.

Free ShippingYes
Features

Amana 55370 Reversible Stile & Rail Assembly Router Bit features

  • 2-Wing With Ball Bearing Guide
  • Use one tool for both cuts by reversing the assembly. Includes shims that give perfect alignment before and after sharpening.
  • For best results, the rail cut should be done on a router table.
  • With complete instructions.
  • Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material. Tongue & Groove can be used on 1/2" through 3/4" material.
Tech Specs

Amana 55370 Reversible Stile & Rail Assembly Router Bit specifications:

  • Manufacturer: Amana
  • Model No.: 55370
  • Category: Amana Door Making Bits
  • D - Cutting Diameter: 1-5/8"
  • Pattern Type: Traditional
  • A' Reveal: 3/8"
  • B1 - Cutting Length: 11/16"
  • B2 - Cutting Length: 7/8"
  • d - Shank Diameter: 1/2"
  • L - Overall Length: 3"
  • Shipping Weight: 1.25 lbs.
  • UPC: 738685953709
In The Box

Amana 55370 Reversible Stile & Rail Assembly Router Bit includes:

  • 55372:Traditional profile cutter
  • 55354:1/4" groove cutter
  • 47708:Ball bearing
  • 47612:1/2" shank arbor with nut
  • 55356:.05mm shims (3 required)
  • 55357:.10mm shims (3 required)
  • 55402:1.0mm washers (2 required)
BrandAmana Tools
Ship InUsually Ships in 24 to 72 Hours
Special Banner
Enable DropshipNo
Your Rating
You May Also Like
  1. Amana 54119 2-3/8-inch Cove Raised Panel Router Bit

    Amana Tool 54119 Carbide Tipped Cove Raised Panel 1-9/16 R x 3-3/8 D x 1/2 CH x 1/2 Inch SHK Router Bit

    $119.00
  2. Amana Tool 54121 Carbide Tipped Ogee Raised Panel 7/8 R x 3-3/8 D x 9/16 CH x 1/2 Inch SHK Router Bit

    Amana Tool 54121 Carbide Tipped Ogee Raised Panel 7/8 R x 3-3/8 D x 9/16 CH x 1/2 Inch SHK Router Bit

    $109.40
  3. Amana 49562 Carbide Tipped Door Edge Detail Router Bit

    Amana Tool 49562 Carbide Tipped Door Edge Detail 3/8 x 1/8 R x 1-3/4 D x 11/16 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit

    $85.09
  4. AMANA TOOL #SC588 REVERSIBLE STILE/RAIL CLASSICAL SHAPER CUTTER

    AMANA TOOL #SC588 REVERSIBLE STILE/RAIL CLASSICAL SHAPER CUTTER

    $71.23