Amana Tool 55314 Carbide Tipped 45 Deg Laminate Miter Joint Undercutter Assembly 1-3/8 D x 1/4 CH x 1/2 Inch SHK w/ Lower BB Router Bit

Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer.

a. Laminated top is 'under-cut', as shown.

b. Apron laminate is pre-cut at 45.ニ_

c. Adhere pre-cut laminate for a perfect fit. A fine file

ニ_ニ_ may be used to remove the sharp edge after joining.