BBB Rating A+ Click for Profile  
Track Order
Contact Us
  1-800-640-8665
Search
Amana Tool Free Shipping

Amana Tool 55202 Carbide Tipped Countersink #6 Screw 3/8 D x 1/8 Drill D x 5/16 Round SHK

SKU
AMA-55202
main product photo
$31.24
CT COUNTERSINK, #4 SCREW
Category: Amana Tool

Used to countersink holes for the heads of screws in woods, plastic and non-ferrous materials. The 2-flute integral design ensures uniform and concentric results each and every time. Carbide tips provide chip free hole edges and lasts much longer than steel countersinks.

Available in a wide variety of sizes, complete with the HSS M2 fully ground drill bit.

Excellent for Drilling:

  • Natural Woods
  • Man-Made Boards
  • MDF
  • Chipboard
  • Plywood
  • Aluminum/Non-Ferrous
  • Aluminum Composite Material (ACM)
  • Composites
  • Composite Decking Materials
  • High Density Polyethylene (HDPE)

Warning: When drilling aluminum/non-ferrous materials, for optimal results and extended tool life use lubricant or air cooling. Make sure the material is fixed and drill is stable during drilling.

CNC Countersink

Drilling countersinks with these bits on the CNC machine is a great way to save time and have your pieces look great every time!

With the adjustable depth drill bit you can adjust them for whatever size material youニ_椚re working with. They are best used with a drilling toolpath, utilizing the peck drill option at .25" per pass with a .125" retract height.

For best results run at 3,000 RPM with a 30 IPM (Inches Per Minute) plunge rate. No feed rate needs to be set with these as they only move up and down with the Z axis, not side to side. If your software doesnニ_椚t allow a 0 feed rate, you can enter 1 IPMニ_ニ_(Inch Per Minute) in the feed rate as a placeholder.

For countersinks with 1/4" round shank, use 1/4" spring collet.

For countersinks with 5/16" round shank, use 7-8mm spring collet.

For countersinks with 3/8" round shank, use 9-10mm spring collet.

Enable DropshipNo
Your Rating
You May Also Like
  1. Amana Tool 45736 V-Groove 108 Deg. Folding for Aluminum Composite Material (ACM) Panels Like Alucobond, Dibond, 0.090 Tip Cut Width x 3/8 CH x 1/2 D x 1/2 Inch SHK Carbide Brazed to Steel Shank Router Bit

    Amana Tool 45736 V-Groove 108 Deg. Folding for Aluminum Composite Material (ACM) Panels Like Alucobond, Dibond, 0.090 Tip Cut Width x 3/8 CH x 1/2 D x 1/2 Inch SHK Carbide Brazed to Steel Shank Router Bit

    $44.81
  2. Amana Tool 45962 Carbide Tipped Ball End 5/16 R x 5/8 D x 9/16 CH x 1/2 Inch SHK Router Bit

    Amana Tool 45962 Carbide Tipped Ball End 5/16 R x 5/8 D x 9/16 CH x 1/2 Inch SHK Router Bit

    $33.64
  3. Amana Tool 47602 Router Arbor with Hex Nuts and Washers 5/16-24 NF D x 7/8 Height x 3/8 SHK

    Amana Tool 47602 Router Arbor with Hex Nuts and Washers 5/16-24 NF D x 7/8 Height x 3/8 SHK

    $5.21
  4. Amana Tool AMS-219 3-Pc Carbide V-Groove 90, 108 and 135 Deg. Folding Double Edge for Composite Material (TCM, CCM, ACM) Panels, 1/2 Inch SHK ZrN Coated Router Bit Pack

    Amana Tool AMS-219 3-Pc Carbide V-Groove 90, 108 and 135 Deg. Folding Double Edge for Composite Material (TCM, CCM, ACM) Panels, 1/2 Inch SHK ZrN Coated Router Bit Pack

    $233.25